| Example |
Specification |
Typical Usage |
K03/G04
|
Sinkhole with edge drip groove for underslung sink. Specifiy drip groove seperately (G04) |
-Drip groove helps to prevent liquid spills creeping through joints and into under bench area
-Used typically in chemical and analytical laboratories
-Spills can easily be wiped into sink
|
K04 |
Sink hole with finish as cut for drop on sink |
-Ensures that hazardous spills are dealt with immediately and appropriately
-Environmental and responsible solution to avoid contaminated liquids entering the water system
-Used in radiology and pathology laboratories |
K05
|
Rebated sink hole with finish as cut |
-Easy to clean where contamination is a concern
-Ensures the integrity of experiments
-Typically used within micro-biology laboratories
-Usually bedded on and sealed with sealant |
K08 |
Sink hole and drainage grooves |
-Standard sink hole with routered drainage grooves
-Helps water drain to sink
-There are a variety of drainage groove configurations |
K09 |
Sink hole and drainage grooves with perimeter groove |
-Perimeter groove helps contain liquid within sink area
-Variety of drainage groove configurations |
K06 |
Sink Lid |
-Provides extra working space
-Drilled hole hole allows easy removal
-Holes can be positioned under taps |
